| |
| Tai Pin High Efficiency and Precision radial Drills |
|
| Tai Pin High Efficiency and Precision radial Drills |
|
| Tai Pin High Efficiency and Precision radial Drills |
|
| Tai Pin High Efficiency and Precision radial Drills |
|
| Tai Pin High Efficiency and Precision radial Drills |
|
| Tai Pin High Efficiency and Precision radial Drills |
|
| Tai Pin High Efficiency and Precision radial Drills |
|
| Tai Pin High Efficiency and Precision radial Drills |
|
| Tai Pin High Efficiency and Precision radial Drills |
|
| Tai Pin High Efficiency and Precision radial Drills |
|
|
|
| Tai Pin High Efficiency and Precision Radial Drills |
| |
| TPR-720A / 820A / 920A / 1100 / 1230 / 1230H Features: |
- Adopts mechanic switch with forward/reverse functions and longer service life with low damage.
- The arm is made if high-class cast-iron. Arm slide is under strict heat-treatment and grinding.
- 2HP motor can provide diverse speed selection under heavy-duty cutting.
- The main spindle is balanced by a special spring and is more durable than traditional balance mechanisms.
- The over-load protective devices can protect the operator from injury.
- Extra auxiliary dial for spindle feed depth indication. With this indicator, we can review the monumental feed depth of spindle 1 through 210mm at any moment.
|
|
 |
| TPR-720A |
|
|
|
|
|
| |
TPR-720A |
TPR-820A |
TPR-920A |
TPR-1100 |
TPR-C2500 |
| Distance from column surface to spindle center, Max |
750 |
850 |
950 |
1100 |
2500 |
D+C |
| Distance from column surface to spindle center, Min |
220 |
280 |
500 |
C |
| Travel of spindle head |
530 |
630 |
730 |
820 |
2000 |
D |
| Distance from base surface to spindle end, Max |
1060 |
1210 |
1270 |
2000 |
E |
| Distance from base surface to spindle end, Min |
260 |
350 |
470 |
550 |
F |
| Elevating height of Arm |
580 |
640 |
570 |
1000 |
E-F-1 |
| Effective area of box table |
600x445x380 |
635x520x415 |
1000x800x560 |
|
| R. P. M of spindle (rpm x steps) |
88, 154, 282, 455, 796, 1500x6 |
44~1500x12 |
16~1250x16 |
|
| Feed of spindle (rev. x steps) |
0.05, 0.09, 0.15x3 |
0.05, 0.09, 0.15x3 |
0.04, 3.20x16 |
|
| Main motor (HP) |
2HP |
3 (two speed motor) |
10HP |
|
| Elevating motor (HP) |
1HP |
1HP |
5HP |
|
| Capacity |
Drilling |
Dteel |
Ø32 |
Ø42 |
Ø80 |
|
| Castiron |
Ø50 |
Ø55 |
Ø100 |
|
| Drilling |
Steel |
Ø25 |
Ø25 |
Ø65 |
|
| Cast iron |
Ø32 |
Ø38 |
Ø75 |
|
|
|
|
